The wireless[wifi]data transmission is one of the most valuable technological advances of recent times. With this type of transmission we can send data from one device to another wireless at a distance that may eventually include kms. Data travels through the waves so this type of signal is very vulnerable to interference, which can limit the transmission or cancel it altogether. Learn how to increase wifi signal will enable the transmission quality is better, increase the speed and data are transmitted in an integrated manner. Learn here how to improve wifi signal.
![]()
First you have to monitor the area where we have the router device or select the most appropriate place to do it. There must be no obstructions between the transmitter and the receiver must avoid the two walls, windows or tabs. The correct place to install is the central position on the devices that will connect to it.
Select at the transmitting device and the appropriate channel transmitter. Given that the transmitted waves travel through a given frequency channel, adjust the device to the channel that we believe may be less saturated. If you know what may be the only solution is to go channel by channel trying to locate the less saturated, where the signal is clean and powerful.
Avoid operating other devices that may interfere with the transmission. Some of these devices include microwaves, cell phones, cordless phones, TVs and other devices especially working wirelessly, as can also be a keyboard or mouse.
Pay attention to the router to be used. Must have a high transmission power and depends largely on your antenna. This ability is measured in dBi, the larger the number of this measurement in its antenna, the greater the possibility of transmission. If the current antenna offers few possibilities, replace it with a higher capacity and if that is not possible, consider changing router to a model that has multiple antennas.
Select at the transmitting device and the appropriate channel transmitter. Given that the transmitted waves travel through a given frequency channel, adjust the device to the channel that we believe may be less saturated. If you know what may be the only solution is to go channel by channel trying to locate the less saturated, where the signal is clean and powerful.
If the above solutions have not worked, the market offers another solution that delivers excellent results for wifi signal transmission. This solution is called "PLC adapter" and two units are needed to establish the connection. The first will be plugged into the mains and the router and the second to the device you want to get the signal and power.